My Drain is Blocked, How Do I Fix It?

Blocked drainWe all know how frustrating a blocked drain can be, the sink taking longer to drain, backed-up water, broken pipes, and even overflowing sewage. A blocked drain is something most of us have experienced at least once in our lives, and it’s something you need to deal with quickly to avoid dealing with a burst pipe and a completely useless bathroom.

So I hope you enjoy reading about unblocking your drain. If your drain is blocked, here’s how to fix it!

Try Using a Bent Wire Hanger

This method is simple enough but often fixes the majority of blocked drain problems. All you need to do is take a regular wire coat hanger and straighten it out as much as you can, leaving one end bent over int the shape of a small hook. Then, pass the bent wire hanger into your drain and start fishing around. It shouldn’t be long until you are pulling out all sorts of hair and gunk from the drain. Just ensure you’re pulling the debris out, instead of pushing it further inside your drainage system – as this can significantly worsen the problem.

Once you’ve fished out as much of the debris as possible and your bent wire starts coming up empty, it’s time to run hot water through your pipes to clear any remnants away. For many people, this technique effectively clears their drains and helps them to run smoothly. So, if you’ve been looking for a reasonably quick fix – give the bent hanger technique a try, it may be just what you need to unblock your blocked drain with ease.

Baking Soda and Vinegar

baking sodaOften, when it comes to blocked drains, most of us revert to using strong chemical cleaners. However, common household products can be even more effective. Baking soda and vinegar is a natural drain cleaner. The combination of ingredients fizzes in your drains, helping to remove gunk, hair, soap, and grime that has built up in your pipes.

Let the solution sit in your drains for one hour or even overnight if you can and then flush through with hot water. For many, this blocked drain strategy is an easy solution that really works and by using ingredients already in your home, it’s a money-saver, too!

Wet and Dry Vacuum

Wet and dry vacuums are fantastic tools for unclogging drains as they can create the right amount of suction needed to remove blockages. Start by setting your vacuum to liquids and then create the tightest seal possible over your drain – covering the vent to prevent any mess. With the vacuum turned to the highest setting it allows, this can be a powerful enough method to draw the clog up out of the pipe and into the vacuum bag. This method doesn’t work for everyone, but some people have seen real success from it.

Boiling Water Down the Drain

There is no easier method for cleaning your drains than the simple boiling water trick. All you need to do is put the kettle on and boil as much water as it will hold. Next, pour the boiling water slowly down the drain in, to allow it to work for several seconds as you pour.

This method is fantastic for clearing small blockages, washing away grime, and even clearing your drains out at the end of washing up every day. A simple but effective blocked drain clearance solution, boiling water is a great solution.

Get Messy and Clean the Pipe Yourself

This method is more time-consuming but extremely effective (if you know what you’re doing). While you don’t need to be a professional plumber for this to work, it is important you follow the method we’ve outlined below so that you know how to put the pipes back together again.

The first step is to place an empty bucket underneath the U-shape of your pipe (you can find this under the sink). This bucket is integral to the operation as it collects any spilled water and reduces the need for an extensive clean-up process. Next, using a plumber’s wrench, loosen the slip nuts at either end of the pipe and remove the trap. Turn the trap upside down and empty the contents into a bucket. You can thoroughly clean the pipe with an old toothbrush, if you want to, in order to remove any remaining debris. Finally, rinse the trap with water and put everything back together. In most cases, unless there is a significant blockage further down your pipes, this method will have done the trick.

Use a Drain Snake


Drain snakes are fantastic for clearing out your pipes and can work wonders on unblocking drains. A cheap piece of equipment, a drain snake is basically a long, flexible metal rope that has a spiral piece of metal attached to the end for collecting debris and other blockages.

As you would with the hire hanger, all you need to do is feed your drain snake down the drain and pull it out again (hopefully with plenty of hair and grime attached to the end).

Salt and Baking Soda Solution

Similar to vinegar and baking soda, the addition of salt to your drains can help cause a chemical reaction that breaks down blockages, helping them flush through your pipes effectively. All you have to do is mix ½ cup of table salt with ½ cup of baking soda and then pour the solution down the drain. Leave it for 10-20 minutes to do its job and then follow it with boiling water. The chemical reaction created will help dissolve some of the nastiest of blockages.

Use Dish Detergent to Unblock Your Toilet

A blocked toilet is the worst, it really is. However, there is a simple solution and that is dish detergent. Simply pour ¼ cup of dish detergent into the toilet bowl and then follow it with some boiling water. The dish soup acts wonderfully as a lubricant, helping break down any greasy residue in the bowl and flushing through any blockages – stopping them from sticking to the pipes. Once you’ve poured down the hot water, start plunging and you should feel the blockages come loose. It’s a messy job, so be sure to wear rubber gloves.

Use Plenty of Pressure

Blocked drains in the bathroom are very problematic. If you’re struggling with a blocked drain in the bath, pour some baking soda and vinegar down (as mentioned in tip 2) and then place the plug over it. Leave the solution to set in the pipes for around an hour and then fill the bathtub with water. Once the bath is full, remove the plug and let the pressure of around 40-60 gallons of water wash through your pipes and dislodge the blockage.

Household Plunger

sink plungerOne of the most common methods for fixing a blocked drain is a household plunger. Always ensure you create a tight seal around the drain and the plunger, so that you get the right amount of suction. Then, plunge vigorously several times. The mixture of suction and pressure should help to help flush blockages out from your drain. Finally, follow with hot water.

Blocked Drain Clearance Near Me

If your drain is blocked and you’ve tried many of the techniques mentioned above, but without any success, you will need to call in a professional. If your blocked drain problem is severe, it will need to be dealt with professionally as your drains may require extensive clearance.

If you’re looking for blocked drain clearance that is near your home, call ASL Drainage today. Our team of drain clearance professionals are here for you and can help get the problem done efficiently and thoroughly. What’s more, they will even provide advice and suggestions on how you can prevent blocked drains in the future. If you would like to find out more or book our drain clearance services, call ASL Drainage today.

Leave a Reply

Your email address will not be published. Required fields are marked *