Septic tanks have been used for over a century to treat household waste in homes not connected to the mains sewer. When designed and maintained properly, they can last for decades. But thousands of homeowners across Surrey, Hampshire and Berkshire struggle with septic tank problems, including tanks that smell, overflow, or need emptying every few months.

The truth is: most of these “bad tanks” aren’t bad tanks at all. They’re tanks set up to fail.

What Is a Septic Tank?

A septic tank is an underground chamber that separates waste into three layers:

  • Sludge (solids) sinks to the bottom
  • Scum (fats, oils and grease) floats to the top
  • Effluent (liquid) flows out through a pipe into a drainage field, where the soil treats it naturally

A septic tank is not a soakaway pit. Soakaways are only for rainwater. Septic tanks must discharge into properly designed drainage fields (land drains).

Why Do Septic Tanks Fail?

1. Roof water and surface water

The number one killer of septic tanks is rainwater wrongly connected to the foul system.

  • Builders or handymen often “make life easy” by running a downpipe into a foul drain.
  • Customers don’t realise what’s happening until it’s too late.
  • The inflow of water dilutes the effluent, stirs up the sludge, and pushes thick sewage into the drainage field.
  • Once the land drains clog, there is no fix.

Every homeowner should have a note ready for anyone working on gutters or drains:

“Do not connect roof water or surface water to my septic tank.”

2. Fats, oils and grease

Even when customers swear they “don’t put fat down the sink,” the evidence often shows up in the inspection chamber: a thick floating layer of grease.

  • Fat doesn’t break down in the tank
  • It blocks pipes and reduces settlement
  • It coats the drainage field and shortens its life

3. Wrong size or poor design

A tank that’s too small can’t separate waste properly. Solids get pushed straight out into the drainage field.

In the wrong soil (clay, waterlogged ground), septic tanks don’t work at all — a treatment plant is the only option.

 

How Long Should a Septic Tank Last?

With the right design and no roof water, no fats, no shortcuts:

  • A septic tank can work efficiently for 20 years or more
  • With minimal emptying (just as needed, not constantly)
  • With no damage to the environment

The difference between a tank that lasts two years and one that lasts two decades comes down to design, care and knowledge.

 

✅ Need Help With Your Septic Tank?

At ASL Limited, we’ve been helping homeowners across Surrey, Hampshire and Berkshire for over 30 years. Our engineers know how to design, survey and maintain septic systems that last.

Call us today for a site survey or advice: 0800 0488727

 

 

 

 

 

Has your blocked drain man told you that you’ve got pitch fibre pipes instead of glazed clay or modern plastic?

If so, you’re not alone. Thousands of homes built between the 1950s and 1970s were fitted with pitch fibre drains – a material that hasn’t stood the test of time.

Pitch fibre pipework was once popular because it was cheap and easy to handle, but over the years it’s been found to:

  • Blister and flake on the inside.
  • Weaken and squash into an oval shape.
  • Eventually collapse, often leading to repeated blockages.

Because insurers usually class this as “wear and tear”, most won’t cover the repair unless accidental damage (like tree roots) is proven.

✅ The Good News: Structural Lining

Structural lining is a no-dig method that restores the strength of your drain without the need for costly excavation.

How it works:

  1. We carry out a CCTV drain survey to assess the pipe condition.
  2. If the pipe is pitch fibre, we may first use a re-rounding machine to restore its shape.
  3. A resin-impregnated liner is inserted into the damaged pipe.
  4. The liner is inflated with air or water until hardened.
  5. The inner tube is removed, leaving a permanent repair.

 

Why Choose Lining Instead of Digging?

  • No disruption – no digging up drives or patios.
  • Faster – often completed the same day.
  • Cost-effective – no reinstatement costs for paving, landscaping, or waste removal.
  • Stronger than before – creates a smooth, joint-free pipe run that roots can’t penetrate.

Typical Costs

  • Structural lining: From £90 per metre (minimum charge applies).
  • CCTV survey + high-pressure jetting: £400 + VAT (includes labour, plant, and a full written report).

⚠️ Price depends on risk and access — e.g., if the drain runs under a building or has severe deformation, more preparation is required.

⚠️ Why Fix It Now?

When drains crack or joints open:

  • Wastewater escapes into the soil.
  • Supporting ground gets washed away.
  • The pipe “drops” into the void, worsening the crack.
  • This undermining effect can spread damage downstream and even threaten foundations.

Ready for a Permanent Repair?

Don’t wait for another blockage or worse damage. Book a CCTV drain survey today and we’ll give you a clear report, video evidence, and an upfront estimate.

Call ASL Limited: 0800 0488727

 

 

 

 

 

If you’ve just been told you’ve got a cracked or damaged drain, your first thought is often: “That means digging everything up, right?” Not always.

At ASL Limited, we’ve been repairing drains across Surrey, Hampshire, Sussex, and Berkshire for over 50 years. One of the best modern methods is drain lining — a way to repair drains from the inside without the disruption of digging. Here’s what homeowners need to know.

1. What are my options if my drain is cracked or damaged?

Old drains made of short clay pipe sections with multiple joints are the most common culprits. Over time, joints open, cracks form, and blockages follow. Water can leak out of the pipe, weakening the surrounding ground and causing bigger problems if ignored.

But here’s the good news: drain lining is often a practical alternative to replacement.

2. What is Drain Lining?

The process of drain lining is straightforward but skilled:

  1. We start by jetting and cleaning the pipe internally with high-pressure water.
  2. If the pipe edges are lifted, we use a powerful grinder on a protected steel cable to smooth them down.
  3. A resin-impregnated flexible liner is slipped into the pipe and positioned to cover the problem area.
  4. The liner is inflated with air or water, pressing it against the pipe walls.
  5. Once cured, it hardens to form a strong new pipe inside the old one — smooth, watertight, and flexible enough not to crack.

The result: a sealed pipe that restores flow and prevents further leaks or blockages.

How does it compare to replacement?

  • ✅ Faster: typically 2–3 hours including setup.
  • ✅ Cheaper: less costly than excavation, especially where hand digging would be required.
  • ✅ Less disruptive: no digging up gardens, driveways, or floors.

Most customers are amazed at how little disruption lining involves.

 

3. When does lining work best (and when not)?

Lining works best for:

  • Open joints in old clay pipes.
  • Cracks that haven’t yet caused subsidence.
  • Root ingress through joints (roots can be cut out first with specialist machines).

Lining is not suitable when:

  • The pipe has collapsed completely.
  • There’s significant subsidence.

In rare cases, even with a poor gradient, lining is used when the only alternative would be digging up the floor of a house. In those cases, the pipe may still need jetting every six months, but it avoids massive disruption.

4. Costs & Value  £95 a linear meter plus VAT

Lining is almost always cheaper than full replacement.

  • Typical lining jobs take 2–3 hours including setup.
  • The only “inconvenience” is a resin smell on the day, which soon disappears.
  • Full replacement can mean days of work, heavy machinery, or hand digging at high cost.

Real-world example:

One customer with a high water table had constant problems with their treatment plant being overwhelmed in winter. Water was seeping in through open joints in old pipes. By lining those pipes, we stopped the excess water entering the system. The result? Fewer tanker visits, no winter smells, and a treatment plant that could finally do its job properly.

5. ASL’s Advantage

Because we carry out lining so often, our team has decades of experience with the materials, preparation, and process. We take pride in doing the job properly every time.

What makes ASL different is integrity. We’ll never recommend lining if replacement is the only lasting fix. We’ll always explain clearly what we see, provide options, and let you decide.

Our training, pride, and long-term relationships mean customers trust us to do what’s right, not what’s quickest. Many have stayed with ASL for over 20 years because they know our repairs are built to last.

6. Local Service

If you’ve been told your drain needs replacing, don’t panic. Within our 15-mile Guildford service area, we can assess your drain quickly and let you know if lining is an option.

Our office staff connect you straight to someone who understands drains, not just a call handler. With our well-stocked yard, prepared vans, and trained engineers, we can carry out lining with minimal disruption — often the same week.

Don’t assume a cracked drain means weeks of digging and a wrecked driveway. Drain lining could be the solution — faster, cheaper, and far less disruptive.

It was a quiet Tuesday morning in Lower Bourne when one of our long-term customers phoned with a simple message:

“The treatment-plant alarm’s going off — but everything looks fine.”

That single beep was the start of a story that explains why preventative care matters more than anything else in the drainage world.

 

The First Visit

Within an hour, our tanker and jetting van were onsite.

The control panel showed a high-level warning — a sign that water wasn’t leaving the system as it should.

At first glance, the inspection chamber looked clear. No standing water, no odour, nothing obvious.

But years of experience told us: when an alarm sounds, something’s shifting beneath the surface.

So we began our standard procedure — high-pressure jet back from the outlet, followed by a camera survey through the run toward the soakaway.

The Hidden Problem

About 12 metres down the line, the camera caught it: a dark, glassy layer of fat coating the pipe. Grease had built up slowly from the kitchen sink — each wash-up sending a thin film of fat that had solidified over months.

That film narrowed the pipe until flow slowed and the treatment plant triggered a high-water alarm.

Nothing catastrophic yet — but left another week, it could have backed sewage through the garden and into surface-water drains.

 

Preventative Action in Practice

Because this client already had an ASL maintenance plan, we acted fast — no new quotes, no delays. Our tanker emptied the chamber while the jetter cleared and re-profiled the pipework. Within two hours the alarm was off, flow was restored, and the ground was protected from pollution.

The next step was simple but crucial: a re-education visit. We showed the householders what had happened on camera and how to avoid a repeat — wiping plates before washing up, installing a grease trap, and keeping rainwater separate from foul waste.

The Lesson from Lower Bourne

This wasn’t a failure of equipment. It was a failure of routine.

Treatment plants and soakaways depend on lightly aerated soil to absorb and filter treated water. Once fat enters that system, it blocks the micro-pores in the soil, stopping the secondary treatment process altogether.

You can’t “un-block” soil. When that happens, the only solution is a new soakaway or pumping station — costly and disruptive.

This incident proves that listening to alarms and acting immediately is a form of preventative maintenance in itself.

Most alarms aren’t false — they’re first warnings of a system saving itself.

 

From Guildford to Farnham – A Linked Story

If you’ve read our previous articles, you’ll see the pattern:

Preventative Maintenance vs Reactive Maintenance explains the principle, and Promoting Preventative Measures shows it in action across Guildford and Worplesdon.

This Lower Bourne case is the result when those lessons aren’t followed soon enough.

 

The Aftermath – and the Good News

Three months after the repair, our follow-up inspection showed a fully functioning system. The client now keeps a maintenance log, and their plant has had no further issues.

That’s what we call a complete turnaround — from alarm to awareness to action.

Your Own Preventative Plan

If you hear an alarm from your treatment plant or notice slow draining around the property, don’t ignore it.

ASL offers free estimates for CCTV surveys, tank emptying and preventative maintenance across Farnham, Guildford and surrounding villages.

Call 0800 0488 680 to book a survey today.

The most efficient drainage system isn’t the one that looks the newest – it’s the one that’s maintained before anything breaks.

At ASL Limited we’ve learned that preventative maintenance is more powerful than emergency response.

A well-timed service, a quick CCTV survey, or a short jet-wash flush can save hours of disruption and thousands of pounds in future repairs.

The Power of Regular Maintenance

Every drain system – from a domestic kitchen pipe to a commercial soakaway – slowly collects grease, silt and waste. Left alone, that build-up reduces the pipe’s flow rate until it blocks entirely. Once that happens, you’re forced into reactive mode: engineers on site, costs rising by the hour.

Regular maintenance changes that story.

When our Guildford tanker and jetter team attend a property every six months to flush the lines and inspect the system, they remove the material before it hardens into a blockage. Customers notice the difference – no odours, no backups, no stress.

From Effort to Efficiency

Preventative care isn’t just maintenance – it’s optimisation.

A well-kept drainage network allows every connected appliance to work better: dishwashers drain faster, showers flow steadier, treatment plants process more effectively.

That’s why our engineers call it efficiency in action.

They can see through the camera lens what most people never notice – smooth pipe walls that allow water to travel freely, free from obstruction.

 

A Simple Routine for Homeowners

  1. Quarterly Visual Check – lift the external gully cover and look for standing water.
  2. Six-Month Flush – book a professional jet wash to clear grease and silt.
  3. Annual CCTV Survey – catch cracks and root intrusion early.
  4. Keep Fat Out – wipe plates before washing and avoid pouring oils down the sink.

Small habits, big savings.

 

Why Businesses Benefit Even More

Commercial premises – restaurants, schools, and care homes – see the greatest returns.

A scheduled maintenance plan prevents closure days and protects public health. One client in Guildford saved over £7,000 in a year by swapping from reactive call-outs to planned visits.

As the case study in our next blog shows (It Started with an Alarm – Lower Bourne, Farnham), ignoring a simple warning led to an overflow and environmental risk that could have been avoided with one preventative inspection.

 

Drainage Health Is a Shared Responsibility

Local authority systems rely on households and businesses doing their part.

Fat, wipes, and debris don’t just block a single pipe – they travel downstream and affect neighbours and public sewers. Preventative care protects the whole community.

That’s why we promote education as much as maintenance. Our teams advise customers on how to spot early warning signs and report issues before they escalate.

 

Case Point – Guildford Driveway (Jetter and Tanker in Action)

During a routine preventative visit in Worplesdon, our engineers found a section of pipe showing early root growth. Because the client had scheduled maintenance, we cut and cleaned the roots the same day – no digging, no downtime.

This one simple service extended the life of the pipe by years and avoided what would have been a major reactive repair.

Linking Forward

Preventative maintenance is about planning ahead – and so is our content.

If you missed the first part of this series, read Preventative Maintenance vs Reactive Maintenance.

And to see how these principles work in real life, continue to It Started with an Alarm – Lower Bourne, Farnham.

 

ASL Limited – Your Local Experts

We cover Guildford, Worplesdon, Cranleigh, Haslemere and the surrounding areas for both domestic and commercial maintenance.

Call ASL Limited today to discuss a maintenance plan that will take a load off in more ways than one – 0800 181 684 or email info@asllimited.co.uk

It started on a quiet driveway in Worplesdon, Guildford — a customer we’d known for years, always polite, always busy. The problem? They’d just called for the third time that year with a blocked gully.

Nothing major, they thought. “Can you just jet it again, please?”

But as we lifted the cover and watched the water rise, it was clear the issue was deeper. The pipe wasn’t just blocked — it was tired. Roots had found their way in, fat had hardened, and the joints were wearing thin. A small bit of prevention six months earlier would have avoided it entirely.

That visit became a lesson, not just for the customer — but for us to explain again the difference between preventative maintenance and reactive repair.

What’s the Difference?

Preventative maintenance means you plan your protection before the problem appears.

Reactive maintenance means you wait until it fails and fix it after.

The first is predictable. The second is unpredictable — and that’s where the cost and chaos hide.

At ASL, we see the two side-by-side every week:

  • A customer who schedules regular jetting once a year rarely calls in a panic.
  • Another who waits until there’s a blockage often calls at 6 am on a Saturday, with toilets backing up and garden gullies overflowing.

The work itself can look the same — jetting, camera survey, maybe a liner — but the timing makes the difference between control and crisis.

 

What Happens When You React

We once cleared a system in central Guildford that had collapsed under its own fatigue. The customer said it “just happened.” It didn’t — it built up slowly: grease, roots, neglect. When the pipe finally gave way, it took half the patio with it.

Reactive work is always more expensive because:

  1. Access becomes harder. What could’ve been a quick jet now needs excavation.
  2. Damage spreads. Overflow seeps into the soil, weakening other runs.
  3. Downtime increases. Every hour lost costs homes comfort and businesses money.

And yet, for many, the call only comes after the failure. It’s human nature — out of sight, out of mind. Until it’s not.

 

The Science Behind Maintenance

Drains don’t fail overnight. They deteriorate through a simple cycle:

  • Accumulation – fat, food waste, scale, and silt slowly narrow the pipe.
  • Restriction – flow reduces, minor backups form.
  • Pressure – trapped water finds the weakest joint.
  • Failure – joints separate or collapse; water escapes, soil washes away.

Preventative jetting and CCTV checks interrupt that cycle early — before any pressure builds.

It’s cheaper to clean than to repair.

A standard maintenance visit costs a fraction of a dig-up job. For some, it’s the difference between £120 and £3,000.

 

Case in Point: Guildford / Worplesdon

The homeowner in Worplesdon booked ASL for a standard gully clean after seeing the water slow during a storm.

Our engineer, Darren, noticed the tell-tale smell and dark water. He ran the camera and found early signs of scale and a small crack starting in the clay pipe.

Instead of ignoring it, we lined it that same week — a small section only — sealing it permanently.

Six months later, after the next heavy rain, that same gully ran clear.

No smell, no flooding, no callbacks.

That’s preventative maintenance at work.

The customer now books annual jetting and inspection in the spring — like a dental check-up for drains.

 

Why Most People Still React

People mean well, but life gets busy.

They forget, or assume, “if it’s flowing, it’s fine.”

Builders move on. Tenants change. Small issues hide until they cost thousands.

That’s why we teach clients a simple rule:

“If you can smell it, see it, or hear it — act on it.”

And better still — schedule maintenance before it shows.

 

Business Owners & Landlords

Commercial clients around Guildford, Farnham, and Woking know the risk even better.

A blocked kitchen gully at lunchtime can stop a restaurant.

A flooded car park can close a care home.

That’s why we offer planned maintenance contracts:

  • Regular tanker visits for grease traps or treatment plants.
  • Routine jetting and CCTV checks on shared systems.
  • Emergency cover for peace of mind.

Planned work means no surprises — and the same engineer knows your site, your setup, and your history.

 

It’s Never Just About Pipes

Preventative maintenance isn’t just about avoiding cost — it’s about protecting the property, the ground, and the people.

Every litre of wastewater that escapes untreated can damage soil and nearby foundations.

Every delay risks contamination of gardens, wells, or surface water drains.

Good maintenance is environmental care — quiet, consistent, and unseen.

 

Local Lessons

In Guildford, Farnham, and Worplesdon, the soil types vary — some clay, some sandy.

Clay holds water; sandy soils wash away easily.

That’s why local knowledge matters.

Our engineers remember which estates have old pitch-fibre runs, which have roots under the drive, and which need monitoring.

That familiarity is part of prevention.

It’s what keeps our customers with us year after year.

 

Linked Reading

If you’d like to dive deeper:

Next Blog: Promoting Preventative Measures – how small routines prevent big repairs

Later Blog: It Started with an Alarm – the day a small signal saved a septic system in Lower Bourne, Farnham

 

Final Word

The best jobs are the ones you never have to do — because you stopped the problem before it started.

Prevention may not be glamorous, but it’s the quiet foundation of every long-lasting system.

At ASL, that’s what we stand for — drains that stay open, tanks that stay clear, and customers who stay dry.

Call ASL Limited on 0800 0488 680

It was a quiet Tuesday morning in Lower Bourne when one of our long-term customers phoned with a simple message:

“The treatment-plant alarm’s going off — but everything looks fine.”

That single beep was the start of a story that explains why preventative care matters more than anything else in the drainage world.

 

The First Visit

Within an hour, our tanker and jetting van were onsite.

The control panel showed a high-level warning — a sign that water wasn’t leaving the system as it should.

At first glance, the inspection chamber looked clear. No standing water, no odour, nothing obvious.

But years of experience told us: when an alarm sounds, something’s shifting beneath the surface.

So we began our standard procedure — high-pressure jet back from the outlet, followed by a camera survey through the run toward the soakaway.

The Hidden Problem

About 12 metres down the line, the camera caught it: a dark, glassy layer of fat coating the pipe. Grease had built up slowly from the kitchen sink — each wash-up sending a thin film of fat that had solidified over months.

That film narrowed the pipe until flow slowed and the treatment plant triggered a high-water alarm.

Nothing catastrophic yet — but left another week, it could have backed sewage through the garden and into surface-water drains.

 

Preventative Action in Practice

Because this client already had an ASL maintenance plan, we acted fast — no new quotes, no delays. Our tanker emptied the chamber while the jetter cleared and re-profiled the pipework. Within two hours the alarm was off, flow was restored, and the ground was protected from pollution.

The next step was simple but crucial: a re-education visit. We showed the householders what had happened on camera and how to avoid a repeat — wiping plates before washing up, installing a grease trap, and keeping rainwater separate from foul waste.

The Lesson from Lower Bourne

This wasn’t a failure of equipment. It was a failure of routine.

Treatment plants and soakaways depend on lightly aerated soil to absorb and filter treated water. Once fat enters that system, it blocks the micro-pores in the soil, stopping the secondary treatment process altogether.

You can’t “un-block” soil. When that happens, the only solution is a new soakaway or pumping station — costly and disruptive.

This incident proves that listening to alarms and acting immediately is a form of preventative maintenance in itself.

Most alarms aren’t false — they’re first warnings of a system saving itself.

 

From Guildford to Farnham – A Linked Story

If you’ve read our previous articles, you’ll see the pattern:

Preventative Maintenance vs Reactive Maintenance explains the principle, and Promoting Preventative Measures shows it in action across Guildford and Worplesdon.

This Lower Bourne case is the result when those lessons aren’t followed soon enough.

 

The Aftermath – and the Good News

Three months after the repair, our follow-up inspection showed a fully functioning system. The client now keeps a maintenance log, and their plant has had no further issues.

That’s what we call a complete turnaround — from alarm to awareness to action.

Your Own Preventative Plan

If you hear an alarm from your treatment plant or notice slow draining around the property, don’t ignore it.

ASL offers free estimates for CCTV surveys, tank emptying and preventative maintenance across Farnham, Guildford and surrounding villages.

Call 0800 0488 680 to book a survey today.

 

 

 

 

 

 

 

 Call us today

The Power of Gully Sucking: Efficiency in Action

Gully sucking is more than just clearing a gully. It is both a proactive and reactive solution that uses powerful vacuum systems to remove accumulated debris, silt, leaf mulch, and other waste. This method offers significant advantages in efficiency.

  • Swift and Thorough Debris Removal: Unlike manual methods, gully sucking quickly and effectively extracts even stubborn blockages, ensuring a comprehensive clean. This means less downtime for your roads and quicker resolution of drainage issues.
  • Preventative Maintenance: Regular gully sucking, especially in areas with heavy tree cover or during periods of high rainfall, prevents minor accumulations from becoming major blockages. This proactive approach saves time, resources, and avoids costly emergency repairs later.
  • Two-Man Crew, Optimised Operations: Our gully sucking operations typically involve a skilled two-man crew, equipped with a suction tanker and a high-pressure jetting machine. This optimised setup ensures a streamlined process, maximising efficiency and minimising disruption.

     

Health and Safety: Our Top Priority

The link between well-maintained gullies and public safety cannot be overstated. Here is how gully sucking contributes to a safer environment:

  • Preventing Flooding and Water Ponding: Blocked gullies cause water to accumulate on roads. This ponding creates hazardous conditions for drivers, increasing the risk of aquaplaning and reducing visibility. It also damages roads, leading to potholes and further safety hazards.
  • Protecting Property: Uncontrolled water runoff from blocked gullies can flood adjacent properties, homes, and damage vehicles. Regular gully cleaning acts as a protective barrier, safeguarding valuable assets.
  • Mitigating Risks for Road Users and Workers: Keeping roads free of excess water and maintaining stable surfaces reduces risks for all road users. For construction workers near main roads, clear drainage minimises hazards linked to standing water and compromised road integrity.

     

When to Consider Gully Sucking: Signs You Should Not Ignore

Maintaining healthy drainage requires vigilance. Look out for these signs that your gullies need attention:

  • Visible Debris Accumulation: If you see leaves, silt, or general waste building up around the gully grate, it is time for a clean.
  • Slow Drainage: Water lingering on the road surface after rain suggests a partial or full blockage.
  • Potholes or Cracks Near Gullies: Damaged gullies can weaken the surrounding road.
  • Anticipation of Heavy Rainfall: Proactive cleaning before heavy rain can prevent major flooding events.

     

An Eco-Friendly Approach to Drainage

Gully sucking stands out as an environmentally responsible choice. This method uses powerful suction and water without harsh chemicals that can pollute waterways and harm ecosystems. Its lower environmental impact compared to other drainage maintenance methods makes it a sustainable solution for communities.

 

The ASL Limited Difference: Professionalism and Peace of Mind

At ASL Limited, we pride ourselves on delivering professional gully sucking services. We understand that factors such as the size and depth of the gully and the type of debris influence the best approach. Our experienced team uses appropriate equipment and follows the highest safety standards to ensure the job is done right every time.

While alternatives such as posthole boring or jetting exist, gully sucking is often the most effective method, especially when a tanker is present, allowing simultaneous suction and cleaning.

 

Conclusion

Road gully sucking is not just maintenance. It is an investment in the health, safety, and efficiency of our roads and properties. By preventing blockages, protecting against flooding, and minimising environmental impact, it provides a cost-effective and essential solution for maintaining vital drainage systems.

Contact ASL Limited today to discuss your road gully cleaning needs and ensure your drainage systems function optimally!

 

When it comes to drainage solutions in Guildford and the surrounding areas, ASL Limited has established itself as a trusted leader, offering a comprehensive “one-stop shop” for both domestic and commercial clients. With over 25 years of experience and a substantial team of dedicated professionals, we are equipped to handle virtually any drainage challenge.

Serving Surrey, Berkshire, Hampshire, West Sussex and South West London, we are ready to help any time of day or night.
Call us today

 

More Than Just Unblocking Drains

ASL Limited is well known for fast and efficient blocked drain clearance, often resolving issues within 30 minutes. But our expertise extends far beyond basic unblocking.

Our “one-stop shop” approach means you do not need to contact multiple companies for different drainage requirements. We provide a full range of services, including:

Emergency Drain Clearance

24/7 response for urgent and unexpected blockages.

CCTV Drain Surveys

High-tech camera inspections that diagnose problems accurately without unnecessary disruption. Ideal for homebuyers and build-over checks.

Drain Repairs and Installation

From minor repairs to complete system replacements, including trenchless methods such as drain relining.

Private Sewage Systems

Specialists in the installation, maintenance and emptying of septic tanks, treatment plants and pumping stations.

Water Main Services

Leak detection, repairs and full water main replacements.

Groundworks

Complete groundwork services related to drainage and water systems.

Specialist Services

Including root cutting, descaling, drain mapping, gully cleaning and road gully sucking.

 

A Company Built on Expertise and Trust

With a strong team of skilled engineers, tanker drivers and support staff, ASL Limited operates with precision and professionalism. We are a family-run business that values high-quality service and customer satisfaction.

Our operatives do not work on commission. They are focused entirely on delivering the best solution for your specific needs. This ensures transparent advice, fair pricing and dependable service.

Whether you need emergency support or long-term infrastructure work, our experience across specialised departments means we can handle it from start to finish.

 

Why Choose ASL Limited?

✔ Complete Drainage Services
Your one-stop shop for all drainage, sewage and water main needs.

✔ 24/7 Availability
Rapid response for emergencies at any time of day or night.

✔ Experienced Professionals
More than 25 years of experience in domestic and commercial drainage projects.

✔ Customer-Centred Values
Family-run and service-driven, with a strong focus on trust and reliability.

✔ Local Knowledge
Based in Guildford and serving customers across Surrey and neighbouring counties.

 

Need Help With Your Drainage? Contact ASL Limited Today

If you are in Guildford or the surrounding areas and need reliable drainage services, ASL Limited is here to help with fast, effective and stress-free solutions.
 

Pumping Macerated Solids (sewage down the toilet OR stuff put through garbage disposals).

Internal mechanics of a treatment plant clogged with fat and grease
Internal mechanics of a treatment plant clogged with fat and grease

It is more cost-effective and less problematic to separate the sewage from the water and pump water only when or if a situation arises. We usually avoid pumping raw sewage to a treatment plant unless the treatment plant is twice the normal size required. This is because the macerated solids would be churned up by the pump and cause too much disturbance for the separation process to occur in a normal-sized tank.

Treatment Plants

Treatment plants commonly work by three significant processes: initial solids separation from liquids, bacteriological action, and separation in a final settlement small chamber. The clean water can flow by gravity or pump up to and into a drainage field, stream river or water course after treatment.

Is the treatment plant holding tank too small or inadequate?

The floating scum layer of oil and grease, which, if pushed through because of surface water or roof water entering the sewage system or an inadequate grease trap or fat trap through a treatment plant breaching the separation system barriers, will eventually find its way into the drain field or soakaway; going black like oil in the ground.

Not only does this cause pollution, but it will also clog the mechanics of any treatment plant and the ground in which the drainage field is located. This can be extremely costly to put right. (Please see below the different types of treatment.)

All parts of the treatment plant would be affected, even coating the plastic media with fat and grease.

treatment plant media clogged with fat grease and oil
treatment plant media clogged with fat grease and oil

Oil and grease are particularly harmful to the aerobic portion of a treatment plant or septic tank secondary “treatment” in the soil absorption (land drains).

The basic workings of a Treatment plant

Blackened soil from grease and fat through a drainage field.
Blackened soil from grease and fat through a drainage field.

The first chamber in the treatment plant is a holding tank for separation purposes. Providing the holding tank is the right size, and there is room for separation, i.e. the tank is emptied before it gets too thick, so there’s is space in the middle of the first chamber.

Because the first chamber receives waste straight from the drains (not pumped), the contents can get a little stirred up as new effluent enters, especially if it is a large volume at once. 

(You can imagine why no roof or surface water is allowed indirectly or directly.)

The first chamber can trap some unwelcome fats that float or sink to the bottom. Most Manufacturers and designers insist that no material other than human waste is allowed to enter the tank. Greasy material from the kitchen should be trapped in a purposeful large enough grease trap for later disposal by other means.

Please look at our blog on why and how we empty treatment plants and septic tanks.

Read more in our case study about maintaining your treatment plant.

See our blog articles on fat Greece and oil going black like oil in the ground.